dell battery tips

The flexible screen is not new, but if you have heard of the flexible battery, and the thickness is only 0.3mm, only 30 seconds to complete the charge. This is a disruptive battery from NEC.

According to the Organization of American physicist mentioned , this new battery based on organic radical battery technology, with high energy density. When charging is completed, you can refresh teh screen for 2000 times, after charging 500 times, it can still maintain a 75% charge and discharge capacity.

In addition, the new battery is more environmentally friendly than traditional batteries,as no mercury, lead, cadmium these heavy metals included. For the battery manufacturers, the new battery does not need technical threshold, very similar to lithium battery in structure and put into operation in lithium battery production line, which reduces costs.

Environmental protection, low-cost, lighter, rapid charging, if this new battery can be in the mass production , the disturbing problem of battery life for mobile devices will be resolved, and also they can be designed to be more slim. According to the claims of the media, the next generation of Apple products the iPhone 5 is very likely to be the first beneficiaries of this new technology

No fanfare of publicity, HP has updated the company’s official website with the company’s first equipped with Intel’s new 22nm Ivy Bridge processor notebook computer. As mentioned in the comments of the notebook computer, the low end of the Pavilion dv4-5000 is equipped with a 14-inch 1366 × 768 display, 2.3GHz i7-3610QM, Nvidia GeForce GT 630M graphics processor and 4GB of RAM. Dv6-7000 using the same specifications, but instead it uses the same resolution of 15.6-inch display, while the dv7-7000 is equipped with a 2.6GHz i7-3720QM processor and a 17.3-inch 1920 x 1080 display . Memory is 8GB, dual hard drive bays and the Nvidia GeForce GT 650M graphics processor. However, this is not as the model we expected Ivy Bridge attractive models, and their appearance seems to imply that the Ivy Bridge in the rumors of a delay in release may indeed be exaggerated signs.

April was originally set as the Ivy Bridge PC releasing date, but unfortunately, the official website of the Hewlett-Packard doesn’t have the release date and pricing information.

Last week, the Archos upgraded the Android 4.0 for 80 G9, G9, and 101 tablet users. This week, the company has begun delivery of premium pre-installed version of the 8-inch Android ICS, also said the 10.1 inches turbo will begin selling in April. Archos in September last year began selling the 80 G9, in October they came with a higher performance 1.2GHz processor and the 1.5GHz TI processor. Now, the lowest price of the turbo is 200 pounds (about $ 314), it is the same price as the original version of the entry-level. The 1.5GHz version price in the UK is £ 240.

CultofMac site gave a research on whether iOS 5.1 would enhance the iPhone 4S battery life and close to 6000 users participate in the vote, of which only 50% iPhone 4S users said the iOS 5.1 did improve battery performance.

Of which 13% users said that the iOS 5.1 battery life is doubling compared to the iOS 5.0.1 , 20% users said that some increase, but still need a daily charge, 17% users said that the battery life is only slightly increase a little than teh iOS 5.1 .

16% users said the iOS 5.1 and the iOS 5.0.1 have the same battery life, and 9%  users said that the iOS 5.1 the battery life is not as good as the iOS 5.0.1. It seems that Apple really efforts to enhance the the iOS 5.1 battery life , but this software upgrade is still not resolved all problems with a battery.

March 14, 2012 Flexible thin film photovoltaic batteries and photovoltaic module manufacturers SoloPower recently announced its next-generation solar panels aperture area can reach the efficiency of 13.4%,  refreshing the world record of the efficiency of flexible thin-film photovoltaic modules. The results have been confirmed by the U.S. Department of Energy’s National Renewable Energy Laboratory (NREL) .

SoloPower CEO TimHarris said: “The new record efficiency of high PV modules manufactured is produced by  SoloPower’s San Jose plant, our system has been able to supply highly efficient lightweight, flexible components to customers around the world. This also proves the strength of the technology SoloPowerteam and our commitment to continue to improve product efficiency and performance, and cost savings for customers. ”

The SoloPower’s CTO MustafaPinarbasi Dr. pointed out: “SoloPower’s flexible thin-film photovoltaic modules can achieve 13.4% aperture efficiency owe to the past two years in carrying out the efficiency enhancement projects. In 2010, SoloPower’s flexible thin film photovoltaic modules get the certification for UL1703 and IEC(61646 and 61730) standards , which is the industry’s first. with the implementation of new technology in roll to roll production line, we have the component efficiency from 11.2% success upgrade to 13.4 percent ,this year we will also take more improvement measures. ”

A few days ago, SoloPower announced its recruitment of engineers and technical staff of Portland, Oregon plant, the plant is expected to begin later this year of commercial ,production capacity is expected to reach 400MW, and plans to recruit 450 employees.

Short battery life is old trouble since iOS 5, especially on the iPhone 4 and 4S models. But recently, Apple updates referred to “improved battery life” on iOS 5.1, so how big

is this improvement? According to some user, improvement is really visible, especially on the cellular network equipment.Track Apple blog OSXDaily says in their reports:

All users will note different degree of improvement,which depends on the equipment used, as well as the health of the battery itself, but the overall improvement in cellular

network on your iOS device is very obvious, especially the iPhone 4S, iPhone 4 and 3G version iPad 2 Models, the postulate that Apple improved some of the potential problems

related to The geographical location of services. Also the user of WiFi version have also said the improvement is great , even though it looks not very obvious.

The new iPad has 4G LTE network, Retina screen and a strong A5X chip system,so it will definitely need more power. According to ZDNet’s message, the power of the hardware is from a group of 11666mAh battery, 70% more than the iPad 2 battery capacity.

what is amazing is not teh increasing of the battery capacity but it has yet became excessive thickening and heavier. ZDNet said that this means that Apple has mastered the method for lithium-ion battery Capacity substantially. ”

Said truthfully, then the next generation iPhone (we really can not call for the iPhone 5 …) should be much higher than the iPhone will be able to power on 4S, and will not increase the size and weight when uses the same screen of the Retina, and increase the 4G LTE capacity.

So you can pay tribute to Apple’s battery laboratory and production line. I wonder if you, like us, are looking forward to this new iFixit disassembled the iPad the (first half of 2012), to see the new battery’s true capacity.

  CeBIT 2012 exhibition is held in Hannover, Germany from March 6 to March 10. CeBIT is the world’s largest ICT (information and communication technology) exhibition, the iF DesignAward (referred to as the “iF”) is one of the highest awards. iF Award was founded in 1954, is one of the most famous awards in the international arena, the European media called the “Design Oscar”, iF certified products, which means the products of outstanding design.IF Award desktop product for the Dell Precision computer and support the triple-screen Asus CG8565 computer this year.
It is understood that the iF Award ASUS CG8565 computer chassis design was inspired by the stealth warships, this desktop bright spot is an easy-to-use one-button overclocking button as well as three 27 enthusiastic overclockers-inch display. This machine is definitely a favorite for game enthusiasts and high-end players.

Kawasaki Heavy Industries developed for the manufacture of thin film solar battery modeling of laser machines. Is characterized by processing speed increased to 10,000 to 20,000 mm / sec. 　　

Thin-film solar batteries are usually stacked on the surface of the glass substrate transparent electrode film, the semiconductor film (power level) and the metal film, in the cascading process of these films requires the implementation of the circuit shape molding machine (slot) processing. According to Kawasaki Heavy Industries introduced the characterization of the existing molding machine speed of 2000mm / s or so. However, if the solar battery to achieve low cost, molding machines need to have carved a higher speed. In addition, in order to improve power generation efficiency of solar batteries, the high quality of the scribed lines are also highly anticipated.

The development of the molding machine by the laser irradiation apparatus and handling parts. The processing speed increased to 10,000 to 20,000 mm / sec. In addition, in the past need to make the glass substrate in a stopped state before processing, and the glass substrate without stopping the laser irradiation device can be in the adoption, implementation carved processing. In other words, to be able to connect into the glass substrate. With these improvements, reducing the processing of each glass substrate and the processing time interval. In addition, the molding machine carved out of the groove width of the uniform, can form a smooth convex shape and a small burr, the region is expected to minimize the non-power generation and power generation efficiency to contribute. The molding machine of the external dimensions of 3500mm × 2300mm × 1500mm. Maximum size of the substrate can be processed 1400mm × 1100mm.

Kawasaki Heavy Industries also intends in future to the development of the molding machine and has been listed on the wafer high pressure jet cleaning machine combined to provide the entire system. In addition, the company will in December 5, 2011 - December 7 at Makuhari MESSE International Convention and Exhibition Center at the “PV JAPAN 2011″ on the display.

Mitsubishi Materials developed for thin-film silicon solar battery electrodes of Ag (Ag) nano-ink, IT O (indium tin oxide) SiO2 nano-ink and ink. The Mexican Department of the nanoparticles dispersed in ink made ​​of coated film silicon solar batteries in the Si layer, the electrode can be formed called the back of the sub-micron-thick film. The photoelectric conversion efficiency of the vacuum with the original film fairly.

Thin-film silicon solar batteries have advantages: the amount of silicon crystalline silicon can be reduced to 1 / 100, the energy pay period (the electricity to the power required to manufacture the product run time) is short, and compound semiconductor solar battery with susceptible than non-Te (tellurium) and other restrictions on the amount of raw materials. However, for solar battery manufacturers, the introduction of a variety of vacuum film-forming device of the high initial investment cost is a big problem, need to come into a coating film-forming process significantly reduce costs.

According to reports, the electrode ink can be used to create Dainippon Screen (DNS) of the coating device “Linearcoater” in the 1.4m × 1.1m on the stability of large glass film. This will help to reduce thin-film silicon solar battery manufacturing costs.

Mitsubishi Materials will be November 28, 2011 - December 2, held in Fukuoka City, the “21stInternationalPhotovoltaicScienceandEngineeringConference (PVSEC-21)” published on the results of this development. In addition, Dainippon Screen Manufacturing (DNS) will be November 28, 2011 - November 30 in Shanghai, China at the “PVChina2011″ ink coating on the introduction of this technology.